8 views — tap a thumbnail to enlarge.
A 1000 kg payload on rubber tracks, 700 mm across, with a hydraulic scissor lift that discharges at 1300 mm — straight over the wall of a builder's skip instead of into a second heap.
Price includes UK VAT at 20% (£450) and free delivery to the UK mainland.
Item code BF-TT1000 · new, unregistered, UK stock
Added to your basket. View basket
Buy now takes you straight to checkout with this machine in your basket.
Built for the job
The number that decides whether the job is possible. It goes through a standard doorway, down a terrace alley and through a side gate, fully loaded.
1300 mm of discharge height puts the load over the wall of a builder's skip. A low-tip machine means shovelling the same spoil twice.
Low ground pressure spreads a tonne over the whole track. It crosses a finished lawn or wet clay without cutting ruts you have to make good.
Hydrostatic drive with independent track control holds a 25° gradient under full load — the situation where a wheeled barrow gets away from you.
Release the bar and drive stops. On a sloping garden with a tonne behind you, that is the feature that matters most.
Under the limit for a braked car trailer. No plant lorry, no HGV, no waiting on a transport slot to get to site.
Full specification
| Model | BranchForge Titan 1000 HT |
|---|---|
| Payload capacity | 1000 kg |
| Skip capacity | 0.38 m³ heaped |
| Discharge height | 1300 mm |
| Tipping | Hydraulic scissor lift, forward discharge |
| Engine | Single-cylinder OHV petrol, 389 cc |
| Rated power | 13 hp (9.6 kW) |
| Starting | Electric with recoil back-up |
| Fuel capacity | 6.5 litres |
| Drive | Hydrostatic, independent track control |
| Travel speed | 0–4.5 km/h |
| Maximum gradient | 25 degrees laden |
| Track width | 180 mm rubber |
| Overall width | 700 mm |
| Overall length | 2.28 m |
| Overall height (skip down) | 1.24 m |
| Unladen weight | 385 kg |
| Ground clearance | 165 mm |
| Controls | Walk-behind bars with dead-man bar |
| Noise level | 96 dB(A) at operator position |
| Warranty | 2 years parts, 1 year engine (manufacturer-backed) |
Specifications are nominal and may vary slightly by production batch. Shipping weight 385 kg, crated 240 x 80 x 135 cm.
Questions
700 mm across the tracks. A standard UK internal door is 762 mm and an external door 838 mm, so yes — but measure the narrowest point on the route, which is usually a gate post or a meter box, not the door.
1000 kg is the rated payload on level ground. On a gradient you should work to about 700 kg for stability. The skip holds 0.38 m³ heaped, which is roughly 700 kg of wet soil or 950 kg of hardcore — volume runs out before weight does on most muck-away work.
Petrol, deliberately. At this size a diesel adds around 40 kg and pushes the width past the 700 mm doorway limit that is the whole point of the machine. The 13 hp unit is electric start and turns over cold.
25 degrees laden, which covers most sloping gardens. Above that, reduce the load rather than trusting the figure — and always drive up and down the slope, never across it.
385 kg unladen goes on a braked car trailer with the folding ramps supplied in the crate. Check your trailer's plated capacity and your licence entitlement before you load it.
The rest of the range
Road-towable 6″ diesel chipper that turns a day of brash into an hour of work.
Tracked, radio-controlled stump grinder that fits through a 780 mm side gate.
Stand-on tracked loader with a universal quick-attach plate — the machine that replaces the gang.